← How to fuse ordinary hydrogen
Launchers
✨ Launcher accuracy specs
These are the revised B1 targets after final correction and neutralization. The joint prepared-fluid simulation screen passes all ten entries at the 90% yield criterion. Physical launcher qualification depends on the measured coast, angular modes, and merger.
Scroll to see the full accuracy table.
| Error | Independent limit | Correlated limit | Measurement basis |
|---|---|---|---|
| Release timing | 0.5 µs RMS per group | ±0.15 µs per hemisphere | 0.30 µs difference between hemispheres. |
| Pointing | 1.5 nrad RMS per transverse axis, about 1.65 m at focus | 0.5 nrad peak polar dipole | 0.55 m peak displacement at focus from the coherent mode. |
| Release speed | 1.5 ppb RMS, about 3.6 mm/s at 2,370 km/s | ±0.5 ppb per hemisphere | 1.1 m difference in coast displacement between hemispheres. |
| Sector mass loading | 1% RMS per independent group | ±0.3% per hemisphere | Relative to the commanded mass in each sector. |
| Residual grain charge | 5 V RMS about the signed mean on a 1 cm radius grain | 5 V magnitude of the signed mean | 25 V absolute tail, with the specified coast-field and minimum-speed envelope. |
The two signs of a hemispheric error apply to opposite halves of the reactor. The pointing stress test tips rays toward the same pole by an angle proportional to the sine of their polar angle, with the seed held fixed. A common clock shift just changes the pulse time, and a common change in aim can translate the pulse if every channel and the seed are retimed for the new focus. Their limits come from the receiver, seed alignment, and pulse schedule.
The timing, pointing, and speed targets are twice as tight as the central feasibility estimates. On a 100 km measurement baseline, 1.5 nrad corresponds to 0.15 mm of differential position. A 1.5 ppb speed error corresponds to about 63 ps of one-way flight time at 2,370 km/s. The project has yet to demonstrate these accuracies at the required grain speed and throughput.
The earlier simultaneous yield claim used spherical shells formed by sorting parcels by distance from the origin. That step erased the dipole, including its offset relative to the seed, and reassigned inward velocities. The revised, tighter budget has its own joint test. Model correction and archived tests · Axisymmetric handoff study · Reactive pointing and 3D statistics · Joint acceptance test and results.