← How to fuse ordinary hydrogen
✨ Design status
Research completeness and performance risks across the reactor’s major components.
Major components and design status
The research-completeness and risk estimates below await reassessment for the operating conditions described here. Research completeness measures how thoroughly each component’s plausibility has been worked out; risk measures whether further refinement can preserve the performance. Both are subjective judgments.
Scroll the table horizontally to see all columns.
| Component | Current design and evidence | Research completeness | Chance of falling to ≤80% performance |
|---|---|---|---|
| Pulse assembly and burn | Four spherical burns and preliminary multidimensional tests of prepared nitrogen; merger of cold pellets remains to be modeled. | 55% | 40% |
| Pellets and launchers | Source, pellet and cavity-interaction screens; the complete flight, neutralization and assembly path remains open. | 50% | 40% |
| Graphite first wall | Panel and collection-layer geometry with heat-deposition and thermal models; irradiated surface behavior remains open. | 60% | 30% |
| Gas collection and buffer vessel | Channels, warm pumps, buffer and helium banks have flow and load calculations; the complete pump train remains to be designed. | 55% | 25% |
| Isotope processing and storage | Isotope-flow ledger, decay stores and pulse schedule; separation equipment has throughput allowances. | 50% | 15% |
| Power conversion and pulse storage | 54.6% heat-to-electric and 60% preparation efficiencies, heat-engine model and two-pulse storage allocation. | 55% | 25% |
| Radiators and cooling | 400 K radiator balance, area allocation and cold loads; external heat and viewing conditions matter. | 55% | 10% |
| Structure and guides | Prestressed frame, circulating support and shielded guides; global and local stability screens. | 55% | 25% |
| Refurbishment and services | Repair-work scenarios and equipment allowances; the full service equipment and operating plan remain to be specified. | 50% | 20% |
How the estimates are scored
Research completeness is a judgment about the evidence for plausibility at the level of this article. Around 25% means a physical concept and initial scales; around 50% means quantitative calculations with important gaps; around 75% means a connected account with the main sensitivities investigated; and 100% means enough evidence to assess the component’s plausibility at the stated performance without relying on critical unbounded assumptions. It is not a percentage of the work needed to build the reactor, and a complete plausibility case need not be a construction-ready design.
For each component, risk is the estimated chance that further design refinement cannot preserve more than 80% of the modeled 277.68 mW/kg—about 222.14 mW/kg—without a substantial change to the overall architecture or more aggressive assumptions about what is physically possible for a nanotechnology-capable civilization. Component redesign and operating adjustments within the architecture are allowed. The estimate assumes the other components meet their reference requirements and imposes no construction deadline. These are rough judgments informed by the research, not simulation outputs or measured frequencies; the risks overlap and cannot be added.
Research status and next steps
This proposed design connects four modeled pulses to an isotope ledger, a 370-day dispatch, a first wall and a plant energy and mass balance. The component assessment tracks the evidence and performance risks for each part. Three questions are especially important to making the design work:
- Can the pellets form the required burning state? The pulse calculations begin with prepared, converging fuel. Exploratory two- and three-dimensional calculations have tested disturbances in a prepared nitrogen-14 pulse; the earlier merger of cold pellets still needs to be followed through shocks, heating, gaps, timing and the central seed. That calculation must show whether the delivered composition, density, velocity and entropy produce the required burn.
- Can incoming pellets travel through the cavity? Reflected and released gas, carbon vapor, dust and slow pulse products can encounter the next incoming fuel. The combined environment and its effects on pellet heating, coatings, phase and trajectory need to be calculated together with collection and cleanup between pulses.
- Can the first wall recover fuel continuously? The material balance assumes eventual return of reusable fuel. The hot, irradiated graphite must retain or release each species in a way the channels, pumps, separation equipment and refurbishment system can handle. Retention, emission, permeability, recovery rates and surface lifetime need to be established under the pulse conditions; permanent escape or export and additions to structural stock would increase fresh supply.
Other work includes completing the pump, refrigeration, structural and service-equipment budgets; checking pulse convergence, nuclear rates, dense-plasma properties, radiation transport and first wall heat loads; and testing the components experimentally.
See the sources and calculations for the full article.